4. Before riding - Assembly
Lift the stem up and close with the locking mechanism. Connect the cables
between the handlebar and the stem with the quick connectors in plastic to
eachother. Make sure you connect it in the right direction. Gently push the
excess cable length into the stem tube. Make sure the cords are not squeezed
or damaged. You may pull gently the cord next to the folding mechanism to pull
excess cable away from the stem to ease the connection. Attach the handlebar
to the stem.
Inse screws on both sides
half way and then tighten
screws rmly.
Push power button to see that
evething works.
07
To Next Page
Loading...
