e-way E-3530 - Regular Maintenance; After Sales Service; Adjusting the Disc Brake

6.3 Regular Maintenance
This scooter needs regular maintainance. Please do not disassemble or
assemble the E-scooter without the guide or help from professional
maintenance personell.Pas might get loose during riding and before each
ride, you should go over the scooter to make sure that all screws are fastened,
that wheels are turning freely, brakes work properly and that no foreign
objects are stuck. Check for visible signs of wear and contact us if you are in
doubt if you need to change pas or have any questions.
7. After sales seice
You can nd answers to many questions as well as spare pas at www.wilfa.
com/eway. If you have a problem you can’t solve yourself, please contact the
store where you bought the scooter for fuher help.
8. Adjusting the disc brake
If the brake is too tight, use the hexagon wrench to loosen the screws on the
caliper, and slightly send back the brake cable to shoen the exposed length,
then tighten the screws. If the brake is too loose, loosen the screws, and slightly
pull out the brake cable to lengthen the exposed length, then tighten the
screws.
Brake Cable
17