e-way E-3530 - Page 28

1. Stop riding or ride scooter at low speed,
avoid climbing.
2. Check whether the motor wire is
damaged, and whether the temperature
signal wire of the motor wire is
shocircuited to the ground.
3. Replace the motor.
Motor high
temperature
H1
1. Check whether scooter has been fully
charged, riding the scooter at low speed,
avoid braking suddenly when scooter is
fully charged.
2. Resta. Check if App has been wrongly
upgraded.
3. Replace the control board.
Over voltage,
emergency
BP
1. Check whether scooter has been fully
charged, riding the scooter at low speed,
avoid braking suddenly when scooter is
fully charged.
2. Resta.
3. Check if App has been wrongly upgraded.
4. Replace the control board.
High voltage alarmBH
1. Stop riding and get scooter charged.
2. Resta.
3. Check if App has been wrongly upgraded.
4. Replace the control board.
Low voltage alarmBL
SolutionsDefect DescriptionDisplay
20