• E2S V1 & JUNIOR: 1 - Eco (Green = slow), 2 - Sport (Red = quick).
EN
Gear Switch
The higher the gear, the higher the speed. Short press the power button twice to switch between the following gears:
Lights control
To turn on both the front- and the rear lights, the scooter must be on and the power button must be short pressed once. The
brake light turns on automatically when braking.
Cruise Control-Function
When riding, hold the gas accelerator in wanted speed for 5 second (until your hear a beep) to activate the cruise control. To
deactivate the cruise control, press either the brake handle.
Start-mode selection
For safety purposes all E2S models are set by default to non-zero start mode, meaning the motor will not start until you kick
start the scooter and pass the speed of 3km/h.
NON - Non-zero start mode (must be kick started)
ZERO - Zero start mode (motor starts even when the scooter stands still)
To Next Page
