13
New Battery Usage
-Please follow the steps below to efficiently break-in the new batteries.
• Fully charge the new batteries prior to initial use. This allows for 90%
battery performance upon first use.
• Move slowly at first, and do not travel too far until you are aware of the
capable driving distance based on the battery indicator.
• Recharge the batteries again fully after first ride. This will allow over 90%
battery performance on the following ride.
• After approximately four to five more charging cycles, the batteries will
allow for 100% battery performance.
If the batteries need to be replaced, please call EWheels service department
directly for replacement, or use the following specifications when purchasing
replacement batteries.
Type: Deep Cycle, Sealed Lead Acid OR Deep Cycle Gel-Cell Batteries
Size: 6” x 3.9” x 3.75”
Voltage: 12 Volts
Capacity: 12 AH (Amp Hours)
To Next Page
Loading...
