To Next Page

To Previous Page

MAINTENANCE

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

5 - 22

LUBRICATION

Do not use more than three (3) pumps of grease in any grease fitting at any one time. Excess grease may cause

grease seals to fail or grease migration into areas that could damage components.

Putting more than three pumps of grease in a grease fitting could damage grease seals and cause premature bearing

failure.

SPARK PLUGS

Tool List Qty.

Spark plug socket, 13/16", 1/2" drive......................................................................................................................1

Ratchet, 1/2" drive ..................................................................................................................................................1

Plug gauge, wire type .............................................................................................................................................1

Anti-seize compound ...........................................................................................................................................AR

Torque wrench, 1/2" drive, ft. lbs.............................................................................................................................1

Use care not to over-tighten the plug. Over-tightening can cause damage to the aluminum cylinder head threads.

Remove and inspect the spark plug at intervals indicated in the Periodic Service Schedule. Spark plug should be

properly gapped. Tighten to 16 ft. lbs. (22 Nm) torque

Lubrication Points

View from Underside of Vehicle

Rack

Ball

Joint