E-Z UP GearRunner User Manual

Open hook and loop enclosure releasing the handles.
Includes: Folding Wagon, Basket and Cooler
51
2
3
4
6
7
Unlock the red latch by pulling on the tab.
Spread the wagon frame halfway open.
Adjust the push handle positions by holding in the button on both
sides of the handle at the same time.
Your wagon is now ready to be used.
To attach the basket align the holes on both sides of the push handle
and press the clamps in. To adjust the tilt, press up on the levers.
Allow the front wheels to swivel out 180 degrees to lock in place.
SET UP
GearRunner
tm
FOLDING WAGON
INSTRUCTION SHEET
A
C
B
A B
WARNING: This product is not to be used to transport children or pets.
Adult assembly and disassembly is required.

E-Z UP GearRunner Specifications

General

Brand	E-Z UP
Model	GearRunner
Category	Tools
Language	English

Summary

Set Up Folding Wagon

Release Handles

Open hook and loop enclosure to release the wagon handles for setup.

Unlock Red Latch

Pull the red tab to unlock the red latch for frame operation.

Spread Frame

Extend the wagon frame to its halfway open position.

Lock Front Wheels

Ensure front wheels swivel 180 degrees and lock into place.

Attach and Adjust Basket

Align basket holes with push handle clamps and press to attach. Use levers to adjust tilt.

Adjust Handle Position

Press buttons on both sides of the handle simultaneously to adjust its position.

Ready for Use

The wagon is now assembled and ready for use.

Fold Down Wagon

Remove Basket

Detach the basket from the push handle before folding the wagon for storage.

Partially Collapse Wagon

Pull the internal loop to partially collapse the wagon and swivel front wheels.

Secure Folded Wagon

Compress the frame fully and secure it with the red locking latch.

Care and Maintenance

Cleaning Instructions

Clean the wagon using mild soap and plenty of water. Avoid detergents.