Eachine VR D2 User Manual

Operating Instructions for Eachine VR D2 goggles (firmware updated as of 13-Mar-17)
Power button turns goggle screen on/off (recording continues), goggles on/off is plug/unplug battery
Menu button scrolls thru selections for AV1 mode menu; when in the menu use Power/- to decrease and Cam/DVR/+ to
increase setting:
1. Brightness: 0 - 100
2. Contrast: 0 - 100
3. Color: 0 - 100
4. Hue: 0 - 100
5. Zoom: 16:9, 4:3
6. Language: English, …
7. Reset
Cam/DVR/+ button changes between:
1. AV1 mode – this is the display mode, best for driving/flying (recording continues in the background)
2. AV2 mode – this is the record mode
 Press  to start recording; press again to stop recording (pressing this button in AV1 mode starts/stops
recording)
 Press and hold  to enter recording settings menu (pressing this button in AV1 mode enters recording
settings menu but does not take you to AV2 mode; still need to press DVR button)
o Video tab – press or  to scroll between menu items and  to select menu item; press or  to
scroll between menu selections and  to make selection
 Size: VGA (640x480), D1 (720x480), HD (1280x720) all at 25fps in MJPEG format
 Record Sound: On, Off in PCM 8KHz, mono, 128kbs sampling
 Video Time: Off (no limit), 10min, 20min, 30min
o Long press  to enter Setup tab
o When in settings menus press or  to scroll thru menu items
o Press  to select menu item to change
o Press or  to change between selections
o Press  to select a selection list item
o Setup tab:
 Format | Next Menu: Cancel, Execute
 Language: English, Francais, Deutsch, Italiano, Espanol
 System Reset | Next Menu: Cancel, Execute
 Light Frequency: 60Hz, 50Hz
 TV Output: PAL, NTSC
o File | Replay Menu: long press  and press again to exit
 Scroll with or to select video to play
 Press  to play/stop video
 While video is playing
 Video plays in forward mode (FW), press to change to 2x, 4x, 8x speed
 Press  to change to backward mode (BW) and  to change to 2x, 4x, 8x, speed
 Long press  exits video play mode
 When in video mode long press  to go to video playback setup screen
 Long press  exits menu
o Press  to exit menu system

Eachine VR D2 Specifications

General

Display Type	LCD
Resolution	800 x 480
Frequency	5.8 GHz
Antenna Connector	RP-SMA
DVR	Yes
Auto-Searching	Yes
Head Tracking	No
Charging Time	2 hours
Video Format	NTSC/PAL
Compatibility	FPV systems
Screen Size	4.3 inch
Channels	40

Summary

AV1 Mode Menu Operations

Brightness, Contrast, Color, and Hue Settings

Adjustable parameters for AV1 mode display, including brightness, contrast, color, and hue.

Zoom and Language Settings

Configuration options for screen zoom ratio and display language in AV1 mode.

System Reset and Light Frequency

Options for resetting system settings and adjusting light frequency (50Hz/60Hz).

Cam/DVR/+ Button Operations

AV1 and AV2 Mode Switching

Switching between AV1 (display) and AV2 (record) modes using the Cam/DVR/+ button.

Recording Functions

Starting, stopping, and configuring recording settings such as video size and sound.

Video Playback and Navigation

Accessing the file/replay menu, selecting videos, and controlling playback speed and direction.