Need help?Do you have a question about the Eagle FISHMARK 240 - ADDITIONAL and is the answer not in the manual?
General| Display Size | 5 inches |
|---|---|
| Display Resolution | 240 x 240 pixels |
| Sonar Frequency | 200 kHz |
| Maximum Depth | 800 feet |
| Frequency | 200 kHz |
| Depth Capability | 800 feet |
| Beam Angle | 20 degrees |
Details how to mount the FishMark 240 in any convenient location, considering clearance and mounting hardware.
Explains how to turn the FishMark 240 on/off and control its lights using the PWR key.
Guides users on navigating the unit's menus using arrow keys and the MENU/EXIT keys.
Describes how to switch between the five operating pages like FasTrack, digital/chart, etc.
Explains how to zoom in or out using the ZIN/ZOUT keys in automatic mode.
Details how to manually adjust zoom levels using menu options in manual mode.
Explains how shallow and deep depth alarms work, triggered by bottom signal depth relative to settings.
Details how to turn on and adjust the zone alarm to trigger based on echoes within a specified range bar.
Explains how the fish alarm provides audible alerts for detected fish symbols, with different tones for sizes.
Guides on adjusting display contrast and turning the speaker on or off.
Lists checks for power cable, wiring, fuse, and battery voltage when the unit fails to power on.
Provides steps to resolve issues like freezing or erratic operation, often related to electrical noise or connections.
Addresses problems with bottom echo, erratic readings, or lack of fish signals, related to transducer or noise.
To Next Page