Need help?Do you have a question about the Eagle FishMark 160 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Sonar Frequency | 200 kHz |
| Maximum Depth | 800 feet |
| Transducer Type | Single Beam |
| Weight | 1.5 lbs |
| Battery Life | up to 10 hours |
Product dimensions, frequency, power, and display resolution.
How to mount the unit in a convenient location on the boat.
How to connect the unit to a 12-volt battery system for permanent installation.
How to install the transom mount transducer for permanent use.
Instructions for installing an optional speed sensor on the boat's transom.
How to attach the gimbal bracket to the portable power pack.
Steps for installing either rechargeable or D-cell batteries into the power case.
How to assemble the transducer and bracket for portable use.
Keys for moving between screens, menus, and options.
Keys for specific functions like Zoom, Alarm, Power, and input.
How to turn the unit and its display lights on and off.
How to navigate and use the unit's menu system.
The default screen showing underwater world, depth, surface, and bottom.
Shows underwater world with an enlarged view on the left side.
Combines chart view with digital data like depth, speed, temperature.
Converts echoes to horizontal lines, showing rapid updates under the boat.
Allows different displays for fishing or boating situations, offering eight screens.
How the unit automatically adjusts sensitivity and range for optimal bottom signal.
Controls echo reception, balancing detail with screen clutter.
Unit automatically sets depth range for optimal bottom signal display.
Allows user complete control over the depth range setting.
Enlarge screen echoes to 2X or 4X by pressing ZIN key.
Manually adjust zoom levels in manual mode via menu.
Distinguishes strong/weak echoes, helping identify bottom type and targets.
Controls how fast echoes scroll across the screen.
Identifies targets as fish using symbols, with four size options.
Shows the depth of a fish symbol when Fish I.D. is on.
Customize chart screen by turning digital display, temp, speed, cursor on/off.
A horizontal line to pinpoint a target's depth on the chart.
Shows the section of water being enlarged in split-screen zoom mode.
A bar that triggers the zone alarm when echoes appear within it.
Shows only the bottom depth, flashing if the bottom is lost.
Fish Alarm, Zone Alarm, and Depth Alarm types.
Sounds when bottom signal is shallower or deeper than set limits.
Triggered when echoes pass inside the zone alarm bar.
Distinctive audible alarm when fish are detected by Fish I.D.
Reduces surface clutter by varying sensitivity with depth.
Noise rejection system to combat unwanted signals from various sources.
Adjusts display contrast and turns the speaker on or off.
Displays basic data about the FishMark 160 unit.
Allows changing units for depth, speed, distance, and temperature.
Resets the distance traveled log to zero.
Allows changing the range of the temperature graph display.
Lets you use the unit as if on the water with simulated echoes.
Steps to diagnose and resolve power-on issues.
Troubleshooting steps for unit lock-ups or erratic behavior.
Diagnosing issues with weak bottom echo or lack of fish signals.
Explains why bottom echo disappears or readings are erratic while moving.
Explains why fish arches may not appear when Fish I.D. is off.
Steps to determine and reduce electrical noise interference.
Displays examples of different data configurations available in window groups.
Covers defects in materials and workmanship for one year from purchase.
Lists conditions under which the warranty does not apply.
Contact information and procedure for obtaining service within the United States.
Contact information and procedure for obtaining service in Canada.
How to contact dealers outside the US and Canada.
Information on how to order Eagle accessories like cables and transducers.
Guidelines for shipping products for repair or replacement.
To Next Page