Need help?Do you have a question about the Eagle TriFinder 2 and is the answer not in the manual?
Provides instructions for installing the BroadView transducer.
Lists tools, supplies, and guides on selecting the optimal transducer mounting location.
Details installation procedures for transom and trolling motor mounting.
Advises on correct vertical positioning of the transducer for optimal performance.
Step-by-step guide for assembling the transducer bracket and aligning it.
Details on assembling the transducer bracket and drilling mounting holes.
Instructions for securing the assembled transducer to the boat's transom.
Specific steps for mounting the transducer on a trolling motor.
Attaching the TMB-S bracket and routing the transducer cable.
Shows sensor connections and details the speed sensor installation procedure.
Detailed instructions for installing the optional speed sensor.
Instructions on how to properly connect the sonar unit to a power source.
Illustrates power connections and emphasizes the need for a 3-amp fuse.
Overview of in-dash, bracket, and portable mounting methods.
Instructions for mounting the unit using the supplied gimbal bracket.
Steps for securing the sonar unit to its mounting bracket.
Information on setting up the unit for portable use with a power pack.
How to adjust the unit's sensitivity for better target detection.
How to use the Fish I.D. feature to identify fish symbols.
How to use FishTrack to display the depth of identified fish.
Explains TargetTrack for identifying fish location (left, right, down).
How to use FishReveal to enhance visibility of fish and cover.
Explains how to use Noise Reject (ASP) to minimize unwanted signals.
Overview of the unit's alarm functions, including fish and depth alarms.
Guide to customizing display settings, units, and system information.
How to use the built-in simulator for practicing unit functions.
Steps to diagnose why the unit is not powering on.
Solutions for the unit operating only in demo mode.
Steps to resolve freezing, locking up, or erratic operation.
Diagnosing issues with weak bottom echoes or erratic readings.
Solutions for problems occurring while the boat is moving.
Identifying and eliminating sources of electrical noise affecting the sonar.
Solutions for problems occurring while the boat is moving.
To Next Page
General
