Need help?Do you have a question about the Eagle MagnaView and is the answer not in the manual?
Accesses unit features and allows customization of functions and settings via menus.
Feature that automatically adjusts range and sensitivity based on water conditions.
Allows adjustment of depth range when the unit is in manual mode.
Explains how to activate and adjust zoom in automatic mode.
Details how to use the zoom feature when the unit is in manual mode.
Default mode with Automatic, Fish ID, TargetTrack, and Digital Depth On.
High Speed Scroll mode with Automatic Off, Fish ID Off, Digital Depth Off.
Digital only screen showing depth and alarm settings.
Default Plus mode: Automatic On, Fish ID On, TargetTrack On, Digital Depth On.
Plus Chart #1 plus digital surface water temperature display.
Plus Chart #1 plus digital speed display.
Plus High Speed Scroll mode with Automatic Off, Fish ID Off, All Digital Displays Off.
Digital screen showing depth, temperature, speed, and log.
Digital screen showing depth, temperature, speed, and log.
Sounds an alarm tone when a fish symbol appears on the screen.
Alarms triggered by the bottom signal, including shallow and deep settings.
Allows setting a minimum depth threshold to trigger an alarm tone.
Allows setting a maximum depth threshold to trigger an alarm tone.
Steps to diagnose and fix issues when the unit fails to power on.
Solutions for common operational issues like freezing or erratic behavior.
Troubleshooting steps for poor echo quality or inaccurate readings.
Addresses issues with bottom echo performance during boat movement.
Explains why fish arches might not appear and how to resolve it.
Recommendations for shipping products for repair or service.
Instructions on how to order accessories like cables and transducers.
To Next Page
General
