EasyManuals Logo

Eagle ID-6300 User Manual

Eagle ID-6300
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
one. Thenumbersatthe
lowerleft ofthe screen
arethedigital
bottom
depth
display.
To
change menus,
usethe arrow
keys
in the ZONEALARM
section
of the
keyboard.
To select an item
from the
menu,
use the
arrow
keys
in
the
RANGE section. Once
you
make a selection,
press
the CMN'D
FUNC-
TION
key
to activate
that
selection,
or
press
the
arrow
keys
in
the ZONE
ALARM section to switch
to another menu. Once
all of the selections
are
made,
presstheCMND
FUNCTION
keyand
all selections on
all menuswill
be activated.
tions.
For a detailed
description
of
the
menus,
see the
following
illustra-
MENU
#1
-
FISH SIZE
This menu
adjusts
the size
of
fish that fish alert will alarm or flash on.
When the ID-6300 is first turned
on,
it
automatically
flashes
on medium and
large
fish. You can
adiust
it to flash on
small, medium,
and
large fish,
medium
and
large
fish,
or
large
fish
only.
Notice when the
10-6300 is in
the automatic
mode, only
medium and
large
fish
will
flash.
The fish size feature
is not
adjustable
when the ID-6300 is in
automatic. The menu
appears
with
only
medium
9n the screen. If
you try
to
adjust
it,
the
ID-6300 will sound an tone.
To
adjust
thefish
size,
first make
certain the 10-6300 is not in automatic.
Next,
press
the CMN'D FUNCTION
key.
The menu
appearswith
mediumfish
highlighted.
Tochangeto
small
press
the down arrow
key
in the RANGE section. To
change
to
large, press
the
up
arrow
key
in the RANGE section. Wait six
seconds and the menu
will
disappear,
or
press
the CMN'D FUNCTION
key.
The selection
you just
made
will
now
be activated.
18
MENU
#2-SCC
(SURFACE
CLARITY
CONTROL)
The
markings
--or noise--atthe
top
of
the
display
can
at times extend
manyfeet
below the
surface. This can
interfere
with fish
signals
or other
tar-
gets.
These
markings
are Surface
Clutter and are
caused
by
wave
action,
boat
wakes,
bait
fish,
temperature
in-
versions,
and other
reasons.
Use Surface
Clarity
Control
(SCC)
to reduce or eliminate
surface
clutter.
SCC varies the
gain
of the re-
ceiver between
each transmit
pulse,
while the receiver is
"listening"
for the
return echoes. The
gain
is the lowest
for echoes near the surface.
It
gradu-
ally
increases as the
depth
Increases.
19
SCC:OFF SCC:HIGH
S?rniiIa
ted
Pictures
PDF compression, OCR, web-optimization with CVISION's PdfCompressor

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Eagle ID-6300 and is the answer not in the manual?

Eagle ID-6300 Specifications

General IconGeneral
BrandEagle
ModelID-6300
CategorySonar
LanguageEnglish

Related product manuals