E&P HYDRAULICS LEVEL SYSTEM - User Manual

›
English - Electronic Levelling System
Assembly Manual

Summary

Foreword

Scope of delivery

STEP 1 Fitting the corner supports

STEP 2 Fitting the axle supports

STEP 3 Laying the pipework

STEP 4 Laying the pipework

STEP 5 Installing the electronics

Setting up the operating panel

Explains placement options for the control unit and operating panel, ensuring accessibility and protection from moisture.

Connecting the electric cable

Details how to connect the four-pole electric cable from the control unit to the pump unit, securing it properly.

Connecting to the power supply

Provides instructions for connecting the system to a 12 VDC power supply, including battery capacity requirements.

STEP 6 Taking the system into service

STEP 7 Programming the zero point

STEP 8 Finishing and maintenance

And finally five tips for the customer

Offers key advice for users, including system limitations, usage recommendations, and tipping prevention measures.

Hydraulic pipework

General Terms and Conditions of Trade

Order list for the axle brackets

Notes

E&P HYDRAULICS LEVEL SYSTEM Specifications