5 PairingYourEarbuds
I First-time Pairing WithDevice
Step I: Open the charging case,the earbuds will automatically power on and enter into pairing mode.
Step 2:Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices.
Step3:Select"EarFunAir Pro2" fromthelist OfBluetoothdevicesshown
(if a password is needed, type '0000')
o
Notes:
The earbuds will automatically connect with the device they were last paired with when the
case is open.
• Eachearbudcouldbeusedindependently.
2. Connect to a New Device
Option A
Stepl Unpair the earbuds from the Bluetooth-enabled dev•ce that's connected The earbuds will
disconnect from the current device and enter into pairing mode for another pair.
Step 2. Search on the new device and connect
OldDevice
O
Option B
Device
O
Stepl Place both earbuds back into the charging case and make sure they are beingcharged, keep
the cover open and then pressand hold the charging case button for 2 seconds until the LED
indicator Onboth earbuds flash in blue rapidly.
Step 2. Search on the new device and connect
03
To Next Page
Loading...
