07
Reset and Reconnecting
8
If you fail to build connection between two earbuds, or between earbuds and Bluetooth device, please try
the following steps:
1. Place both earbuds into the charging case.
2. Keep the charging case open, then touch and hold the button on each earbud at the same time for at least
10s until they flash in purple then earbuds have been reset successfully.
3. Delete the old connection from the Bluetooth device and reconnect “EarFun Free Pro”.
Flash in purple
EarFun Free Pro
＞10
S
Noise cancelling control
Noise cancelling
ambient sound
normal
L
Tap triple (L)
X
3
Noise cancelling control
Low Latency ON/OFF
R
Tap and hold for 2 seconds (R)
2
S
To Next Page
Loading...
