To Next PageTo Next Page
Need help?Do you have a question about the Earth Stove 1003C and is the answer not in the manual?
General| Brand | Earth Stove |
|---|---|
| Model | 1003C |
| Category | Stove |
| Language | English |
Key safety instructions and warnings for proper installation and operation.
Questions to ask local authorities regarding installation requirements and codes.
Considerations for choosing the optimal placement for the wood stove.
Specifies non-combustible floor protection for ember protection and clearances.
Details minimum clearance requirements for combustible walls and chimney connectors.
Clearance requirements for alcove installations and protected walls.
Instructions for air intake cover and utilizing outside air for combustion.
Specific installation requirements for mobile homes, including safety and structural integrity.
Guidance on securing the stove, grounding, and understanding chimney types.
Details on acceptable connector pipes for residential and mobile home installations.
Procedures for inspecting chimneys and sealing vapor barriers at penetration points.
Mandatory chimney height specifications for proper draft and safety.
Understanding draft requirements and performing a draft test for optimal performance.
Ensuring adequate fresh air supply for proper combustion and ventilation.
Standards for residential and mobile home venting systems, including pipe types and components.
Safe methods for passing chimney connectors through combustible walls.
Instructions for ash drawer handling and understanding the catalytic combustor.
Operation of the bypass damper and primary air control for heat management.
Proper operation, cleaning, and maintenance of the fuel door and glass.
Guidance on adjusting control settings for desired heat output and burn time.
Initial stove curing procedures and instructions for starting and maintaining a fire.
Specific operating procedures for the catalytic combustor during fire startup and refueling.
Procedures for refueling and managing the bypass damper and temperature probe.
Information on approved fuels and the importance of properly seasoned wood.
Guidelines for seasoning wood and proper methods for wood storage.
Safe procedures for removing and disposing of ashes from the stove.
Instructions for maintaining door/glass gaskets and cleaning/replacing the glass.
Understanding creosote formation, inspection, and removal to prevent chimney fires.
Procedures for replacing, cleaning, and operating with the catalytic combustor.
Troubleshooting common issues like smoke, insufficient heat, and fire maintenance.
Resolving backpuffing, odors, dirty glass, and other operational problems.
Resolving problems with the catalyst, flue, creosote leaks, and noisy heat shields.
Identifying and correcting conditions that lead to overfiring damage and operational issues.
List of replacement parts for doors, draft modules, and catalytic combustor assemblies.
Replacement parts for blowers, miscellaneous items, and firebox components.
Detailed diagrams and part numbers for firebrick components.
Diagram illustrating the components of the catalytic combustor system.
Visual representation of the door assembly and handle assembly components.
Description and installation notes for optional outside air ducts and door kits.
Information on optional blower kits and stove-stat kits for automated fan control.
Key safety information, warnings, and listing details from the safety label.
Section for recording service and maintenance history of the appliance.
