Why my EarthQuake Trimmer engine does not start?
- JJohn CoxOct 28, 2025
If your EarthQuake Trimmer engine won't start, there are several potential causes: * The spark plug wire may be disconnected; if so, connect it. * The engine might not be primed; prime it. * The spark plug could be defective or incorrectly gapped; inspect or replace it. * The fuel tank may be empty; add fuel. * The carburetor or fuel line could be dirty; clean them. * The air filter might be dirty; replace it. * The carburetor might be out of adjustment; take the unit to an authorized service center. * The engine could be flooded; wait several minutes before starting. * The throttle control lever might be in the incorrect position; move it to the FAST or START position. * The gasoline may be stale; drain the old gasoline and add fresh gas. * The throttle control leve...

