EarthQuake CS4518 Operator's Manual

EarthQuake CS4518

40 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

OperatOr's Manual & parts

Chain Saw CS4518

GetEarthquake.com

OMCS4518

R100809

© Copyright 2009 Ardisam, Inc.

All Rights Reserved. Printed in China.

WARNING

Before using our products, please read this manual carefully to understand the

proper use of your unit.

Table of Contents

Other manuals for EarthQuake CS4518

Operator's Manual & Parts40 pages

Questions and Answers:

C
Christian HarveyJul 31, 2025
Why does my EarthQuake Chainsaw lack power and acceleration?
- N
  Nicholas GilbertJul 31, 2025
  If your EarthQuake Chainsaw is experiencing a lack of power, poor acceleration, or rough idling, there are several potential causes. First, check the fuel for water or a substandard mixture and replace it with proper fuel. Also, inspect the air and fuel filters for clogging and clean them if necessary. Finally, have an authorized service center adjust the carburetor if it's inadequately adjusted.
O
ojohnsonAug 6, 2025
How to fix starting failure in EarthQuake CS4518?
- K
  kellyrhondaAug 6, 2025
  If your EarthQuake Chainsaw fails to start, the issue might be with the fuel. Check the fuel for water or a substandard mixture, and if found, replace it with proper fuel. Remove and dry the spark plug, then pull the starter again without using the choke. If the problem persists, replace the spark plug with a new one.
D
davenportpeterAug 12, 2025
What to do if oil does not come out of EarthQuake CS4518 Chainsaw?
- G
  Glen TownsendAug 12, 2025
  If oil isn't coming out of your EarthQuake Chainsaw, it could be due to substandard oil quality. Replace the oil. Also, check the oil passage and ports for any clogging and clean them.

EarthQuake CS4518 Specifications

General

Brand	EarthQuake
Model	CS4518
Category	Chainsaw
Language	English

Related product manuals

Preview: EarthQuake CS3816

EarthQuake CS3816