This saw is equipped with the following low kickback bar/chain combination:
Guide bar:
Oregon180SDEA095
Saw chain:
3/8 low profile reduced kickback chain
62 drive links
Oregon S62
For replacement use only above bars and chains
Maintenance of Chain / Bar
Engine Maintenance Schedule
MAINTENANCE ITEM
Every 8
hours
(daily)
Every 20
hours or
seasonally Each Year
Clean Engine and
Check Bolts & Nut
X
Air Filter Check X
(See Air Filter section) Clean * X
Replace X X
Spark Plug
(Gap .028”)
Check/Adjust X
(See Spark Plug section) Replace X
* Service more frequently under dusty conditions
To Next Page
Loading...
