Need help?Do you have a question about the EarthQuake MiniMe P10 and is the answer not in the manual?
General| Type | Powered Subwoofer |
|---|---|
| Driver Size | 10 inches |
| Impedance | 4 Ohms |
| Enclosure Type | Sealed |
| Weight | 35 lbs |
| RMS Power | 500 Watts |
Details electrical shock prevention, damage requiring service, and user servicing limitations.
Connect with RCA patch cords to receiver/pre-amp line level output.
Connect speaker wires to amplifier/receiver speaker outputs for line-level inputs.
Corner placement creates acoustical coupling, boosting response by 9dB.
Connect LFE/Subwoofer output to subwoofer's Left (Mono) input for simplest setup.
Use 'Y' cables to send main outputs to both subwoofer and amplifier if no sub/LFE output.
Connect receiver speaker outputs to subwoofer's Speaker-Level inputs.
Step-by-step guide for adjusting level, crossover, and phase for optimal response.
Details amplifier output, frequency response, dimensions, weight, and driver specs for P10.
Details amplifier output, frequency response, dimensions, weight, and driver specs for P12.
Details warranty coverage for labor, parts, and freight for five years.
Lists conditions that void warranty, including misuse and improper handling.
Instructions for obtaining service, including contacting department and RMA number.
To Next Page
