To Next PageTo Next Page
Need help?Do you have a question about the EarthQuake WE43 Series and is the answer not in the manual?
Defines the operator's duties for safe and effective machine use.
Highlights safety concerns, machine damage, and helpful operating information.
Warning about chemicals known to cause cancer or reproductive harm.
Describes the product's intended purpose and potential misuse.
Safety guidelines directly applicable to the operation of this specific edger.
Information on carbon monoxide risks from engine exhaust and prevention.
Precautions for safe handling, storage, and prevention of fires with gasoline.
Guidelines to prevent burns and fires from hot engine components.
Ensuring the safety of children and bystanders during operation.
Essential safety steps to follow before performing any maintenance or repair.
Explanation of various safety and hazard symbols found on the edger.
Explanation of symbols related to machine controls and indicators.
Details on engine displacement, fuel capacity, oil type, and fuel.
Physical size, weight, and sound level specifications for the models.
Steps for unpacking the edger and verifying all parts are present.
Step-by-step guide to assemble the handlebar and wheel mount.
Instructions for charging the battery for the WE43E electric start model.
Steps to prepare the engine, including throttle cable and fuel/oil quality.
Procedures for mixing fuel with oil and safe fuel handling practices.
Safe and correct procedure for refilling the fuel tank.
Information regarding the clutch break-in period and optimal operation.
Instructions on how to operate and secure the screw-type fuel cap.
Step-by-step guide for starting a cold or unused engine.
Procedures for starting an engine that is already warm or hot.
Instructions on how to safely stop the engine after use.
Specific instructions for starting and stopping the electric start edger model.
Steps to adjust the edger blade to the desired cutting depth.
Safety precautions to take before performing any work on the equipment.
Regular maintenance tasks for the edger unit, including lubrication and tightening.
Procedure for safely removing and replacing a damaged or worn edger blade.
Recommended maintenance schedule for the engine to ensure longevity.
Importance of keeping cooling fins clear of debris for proper engine cooling.
Detailed steps for cleaning the air filter for optimal engine performance.
How to inspect, gap, and replace the spark plug for engine starting.
Precautions and steps for safely transporting the edger in a vehicle.
Steps to prepare the edger for storage lasting 30 days or more.
Information on how to obtain genuine Earthquake® spare parts directly.
Recommendation to use only approved spare parts for repairs to maintain warranty.
Common issues with engine starting, rough running, and stalling.
Troubleshooting for problems with the edger blade turning or cutting.
Troubleshooting for the electric start model's charging and key start functions.
Exploded view and list of parts for the transmission and blade assembly.
Exploded view and list of parts for the handlebar and control assembly.
Diagram showing the main chassis components and their arrangement.
Detailed list of parts for the chassis of WE43 and WE43E models.
A visual guide showing the exploded view of engine parts.
A comprehensive list of all engine parts, including non-serviced parts.
Information on the manufacturer, product model, and conformity to EU directives.
Details of the one-year limited warranty covering the edger product.
Details of the two-year limited warranty for the Viper® engine.
Lists the specific parts covered under the emissions control warranty.
Conditions and exclusions that may void or limit warranty coverage.
Owner's responsibilities for maintenance and warranty repair procedures.
Defines the operator's duties for safe and effective machine use.
Highlights safety concerns, machine damage, and helpful operating information.
Warning about chemicals known to cause cancer or reproductive harm.
Describes the product's intended purpose and potential misuse.
Safety guidelines directly applicable to the operation of this specific edger.
Information on carbon monoxide risks from engine exhaust and prevention.
Precautions for safe handling, storage, and prevention of fires with gasoline.
Guidelines to prevent burns and fires from hot engine components.
Ensuring the safety of children and bystanders during operation.
Essential safety steps to follow before performing any maintenance or repair.
Explanation of various safety and hazard symbols found on the edger.
Explanation of symbols related to machine controls and indicators.
Details on engine displacement, fuel capacity, oil type, and fuel.
Physical size, weight, and sound level specifications for the models.
Steps for unpacking the edger and verifying all parts are present.
Step-by-step guide to assemble the handlebar and wheel mount.
Instructions for charging the battery for the WE43E electric start model.
Steps to prepare the engine, including throttle cable and fuel/oil quality.
Procedures for mixing fuel with oil and safe fuel handling practices.
Safe and correct procedure for refilling the fuel tank.
Information regarding the clutch break-in period and optimal operation.
Instructions on how to operate and secure the screw-type fuel cap.
Step-by-step guide for starting a cold or unused engine.
Procedures for starting an engine that is already warm or hot.
Instructions on how to safely stop the engine after use.
Specific instructions for starting and stopping the electric start edger model.
Steps to adjust the edger blade to the desired cutting depth.
Safety precautions to take before performing any work on the equipment.
Regular maintenance tasks for the edger unit, including lubrication and tightening.
Procedure for safely removing and replacing a damaged or worn edger blade.
Recommended maintenance schedule for the engine to ensure longevity.
Importance of keeping cooling fins clear of debris for proper engine cooling.
Detailed steps for cleaning the air filter for optimal engine performance.
How to inspect, gap, and replace the spark plug for engine starting.
Precautions and steps for safely transporting the edger in a vehicle.
Steps to prepare the edger for storage lasting 30 days or more.
Information on how to obtain genuine Earthquake® spare parts directly.
Recommendation to use only approved spare parts for repairs to maintain warranty.
Common issues with engine starting, rough running, and stalling.
Troubleshooting for problems with the edger blade turning or cutting.
Troubleshooting for the electric start model's charging and key start functions.
Exploded view and list of parts for the transmission and blade assembly.
Exploded view and list of parts for the handlebar and control assembly.
Diagram showing the main chassis components and their arrangement.
Detailed list of parts for the chassis of WE43 and WE43E models.
A visual guide showing the exploded view of engine parts.
A comprehensive list of all engine parts, including non-serviced parts.
Information on the manufacturer, product model, and conformity to EU directives.
Details of the one-year limited warranty covering the edger product.
Details of the two-year limited warranty for the Viper® engine.
Lists the specific parts covered under the emissions control warranty.
Conditions and exclusions that may void or limit warranty coverage.
Owner's responsibilities for maintenance and warranty repair procedures.
General| Brand | EarthQuake |
|---|---|
| Model | WE43 Series |
| Category | Edger |
| Language | English |
