MAINTENANCE
7
Model ST00212
CAUTION: Do not at any time let brake fluids, gasoline,
petroleum based products, penetrating oils, etc., come in contact
with plastic parts. They contain chemicals that can damage,
weaken or destroy plastic.
Make sure the trimmer is unplugged from the power supply, then
use only mild soap and a damp cloth to clean the tool. Never let
any liquid get inside the tool; never immerse any part of the tool
into a liquid.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals Do not store the tool
on or adjacent to fertilizers or chemicals.
IMPORTANT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment should be performed by a
qualified individual using only identical replacement parts.
If you drop the trimmer, carefully inspect it for damage. If the
guard is bent or cracked, handles broken or if you see any other
condition that may affect the trimmer’s operation, it must be
repaired before putting it back into use. Call our customer service
help line at 1-800-633-1501 for assistance.
TROUBLESHOOTING
Problem
- Unit does not run
- Line won’t feed
- Line fails to cut off
Possible Cause
- Extension cord not connected to the plug
- Cord not connected to power source
- Lock button not fully operated
- Line tangled in spool
- Line cutter in guard is damaged or missing
- Line extends past guard
Possible Solution
- Check extension cord is fully connected to tool
- Check extension cord is fully connected to a live receptacle
- Check that lock button is fully depressed prior to moving trigger
- Untangle line
- Replacement/repair line cutter
- Rewind or trim line to line cutter
CALL US FIRST !!
Call us first with questions about operating or maintaining your product
at 1-800-633-1501 between 8:00 a.m. – 5:00 p.m. Eastern
Standard Time, or get assistance on www.americanlawnmower.com.
To Next Page
Loading...
