EarthWise TC70016 User Manual (English)

Questions and Answers:

B
barbarachaseJul 29, 2025
What to do if my EarthWise TC70016 Tiller motor does not start?
- W
  wendyhancockJul 29, 2025
  If the EarthWise Tiller motor doesn't start, first ensure the unit is properly plugged in and that there is electricity available from the power supply. Check the cable for any defects, repairing or replacing it if necessary. Also, the safety switch/plug might be defective, requiring professional repair. Finally, the overheat protection may have activated; allow the motor to cool down for approximately 15 minutes before attempting to use it again.
S
Scott HuynhAug 5, 2025
What to do if my EarthWise Tiller gives poor results?
- N
  noconnorAug 6, 2025
  If you're getting poor results with your EarthWise Tiller, it might be because the working depth is too small; try setting it to the correct working depth. Another reason could be worn blades, in which case you should replace them.
H
hannahdiazAug 12, 2025
Why is my EarthWise TC70016 Tiller making abnormal noises?
- G
  Gail NelsonAug 12, 2025
  If your EarthWise Tiller is making abnormal noises, first switch it off and wait for the tines to come to a complete stop, then remove any jammed objects, as the blade may be jammed. If the noise persists, it could be due to a lack of lubrication, requiring tiller repair (contact customer service at 1-800-633-1501 for assistance). Also, check if bolts, nuts, or other components are loose and tighten them. If noises continue after tightening, arrange for repair.
J
Jeffrey LongAug 20, 2025
How to fix abnormal vibrations in my EarthWise TC70016 Tiller?
- S
  Sheryl BrownAug 20, 2025
  If your EarthWise Tiller is experiencing abnormal vibrations, it could be due to damaged or worn blades, which should be replaced. Another possible cause is that the working depth is too large; set the tiller to the correct working depth.