Need help?Do you have a question about the Earthworks SR25 and is the answer not in the manual?
Frequency and Sensitivity| frequency response | 50Hz to 25kHz ±2dB at 30cm |
|---|---|
| sensitivity | 10mV/Pa (Typical) |
| noise | 20dB, A equivalent |
Power Requirements| power requirements | 48V Phantom, 10mA |
|---|
Acoustic and Output Specifications| peak acoustic input | 145dB SPL |
|---|---|
| output impedance | 65Ω, balanced between pins 2 & 3 |
| minimum load | 600Ω btw. pins 2 & 3 |
Weight and Dimensions| dimensions L x D | 165 x 22 mm (6.5 x .860 in.) |
|---|---|
| weight | 160g (.35lb) |
To Next Page
