1 SPECIFICATION
Model: EADWIFI2
Standard: IEEE 802. 11b/g/n
Antenna Type: Printed PCB Antenna
Frequency Band: 2400-2483,5MHz
Operation Temperature: 0°C~45°C
Operation Humidity: 10%~85%
Power Input: DC 5V/300mA
Maximum TX Power: <20dBm
2 PRECAUTIONS
● Applicable system: iOS, Android.
- Please keep you APP up to date with the latest ver-
sion.
- Due to special situation that may occur, we explicitly
claim: Not all of the Android and iOS system are com-
patible with APP. We will not be responsible for any
issue as a result of the incompatibility.
● Wireless safety strategy: Smart kit only support WPA-PSK/
WPA2-PSK encryption and none encryption. WPA-PSK/
WPA2-PSK encryption is recommended.
Cautions
● Due to different network situation, control process may
return time-out sometimes. If this situation occurs, the
display between board and App may not be the same, please
do not feel confused.
● Smart Phone camera needs to be 5 million pixels or above
to make sure scan QR code well.
To Next Page
Loading...