Need help?Do you have a question about the EAS Electric ECIN Series and is the answer not in the manual?
Guidance on choosing the optimal location for indoor unit installation.
Details on the required clearance space for cassette-type indoor units.
Steps and considerations before commencing the installation process.
Guidance on positioning the unit relative to the ceiling opening and hanging bolts.
Instructions for installing hanging screw rods to support the indoor unit.
Detailed steps for installing the indoor unit onto the ceiling.
Procedures for preparing and installing the decorative panels.
Adjusting the proper hanging height of the indoor unit for optimal performance.
Connecting wires between the indoor unit and its decorative panel.
Steps for installing the wind grill and cover onto the unit.
Specifications for the installation dimensions of cassette indoor units.
Guidance on installing the drainpipe for the indoor unit.
Procedure for conducting a drainage test after installation.
Specifications for connecting pipe length and drop height between units.
Details on materials and dimensions for connecting pipes.
Step-by-step guide to connecting the refrigerant pipes.
Guidelines for arranging the connecting pipes during installation.
Instructions for properly connecting the refrigerant pipes.
Installing the electronic throttle component and connecting pipe assembly.
Procedure for testing the system for refrigerant leaks.
Steps for vacuumizing the refrigerant lines.
Proper insulation of gas and liquid pipes to prevent condensation.
Guidelines for the electrical wiring of the unit.
Details on power supply requirements and wire specifications.
Recommendations for connecting signal wires to avoid interference.
Advice on wiring the power supply for indoor units in a system.
Proper sealing and handling of wiring interfaces.
Overview of functional dial switches for unit configuration.
Configuration settings using Dial-up Switch SW2.
Configuration settings using Dial-up Switch SW3.
Usage and configuration of Dial-up Switch SW8.
Table of error codes and their definitions for malfunctions.
Explanation of LED indicators and their fault display meanings.
List of conditions and situations not covered by the product guarantee.
General| Brand | EAS Electric |
|---|---|
| Model | ECIN Series |
| Category | Fan |
| Language | English |
To Next Page