EASEPAL EC-570 - V. Troubleshooting flow chart

7
11
No vibration by
the motors in the
seat-pad.
①Print motors fail.
②The terminals and wires are poorly
connected or the wires fail.
③Main PCB fails.
①Replace the print motor.
②Plug the terminal securely or
replace the wires.
③Replace main PCB.
12
No vibration by
the motors in the
Foot Rest.
①Print motors fail.
②The terminals and wires are poorly
connected or the wires fail.
③Main PCB fails.
①Replace the print motor.
②Plug the terminal securely or
replace the wires.
③Replace main PCB.
13
No gas charging
in the seat-pad.
①The terminal of the snuffle valves and
wires are poorly connected.
②The snuffle valves fail.
③The inflator pump fails.
④Main PCB fails.
①Plug the terminal securely.
②Replace the snuffle valves.
③Replace the inflator pump.
④Replace main PCB.
14
No gas charging
in the foot rest.
①The terminal of the snuffle valves and
wires are poorly connected.
②The snuffle valves fail.
③The inflator pump fails.
④Main PCB fails.
①Plug the terminal securely.
②Replace the snuffle valves.
③Replace the inflator pump.
④Replace main PCB.
15
No heating in the
back pad
①The terminal of the heating and main
PCB are poorly connected.
②The connectors of heating on the top
of the back rest are poorly connected.
③Heating leaf fails.
④Main PCB fails.
①Plug the terminal securely.
②Connect the connectors
securely.
③Replace the heating leaf.
④Replace main PCB.
16
No heating in the
foot rest
①The terminal of the heating and main
PCB are poorly connected.
②Heating leaf fails.
③Main PCB fails.
①Plug the terminal securely.
②Replace the heating leaf.
③Replace main PCB.