EASEPAL EC-570 User Manual (English)

Need help?

Do you have a question about the EASEPAL EC-570 and is the answer not in the manual?

EASEPAL EC-570 Specifications

General

Brand	EASEPAL
Model	EC-570
Category	Massager
Language	English

Summary

I. Specifications

II. Appearance of the chair

III. Name and functions of components (remote controller)

IV. Malfunction catalog

V. Troubleshooting flow chart

VI. Terminals on the main PCB

VII. Maintenance of the back rest

1. Back Pad and Rear Cover Maintenance

Procedures to disassemble and replace the back pad and its rear cover.

2. Back Rest and Front Cover Disassembly

Steps to disassemble the main back rest structure and its front cover.

3. Motor and Electric Filter Maintenance

Instructions for disassembling the mechanical main unit and its electric filter.

4. Motor Replacement (Kneading, Tapping, Rolling)

Detailed procedures for replacing kneading, tapping, and rolling motors.

VIII. Maintenance of the seat part

1. Seat Part External Component Maintenance

Disassemble seat cover, panel switch, and replace power fuse.

2. Seat Part Electronic Component Replacement

Replace wave filter, pinboard, and main PCB.

3. Pneumatic System and Actuator Maintenance

Disassemble and replace air pump, valves, and actuators.

4. Seat Pad, Arm Rest, Side Board, and Remote Controller Replacement

Replace seat pad, arm rest, side board, and remote controller.

IX. Maintenance of the foot rest

1. Foot Rest Outer Coating and Base Disassembly

Disassemble outer coating using zippers and remove base frame screws. Disconnect gas hoses.

2. Foot Rest Component Removal

Remove rear and front covers, air cylinder, and air bags/hoses. Follow specific steps for each component.

EASEPAL EC-570 User Manual