Need help?Do you have a question about the East Tester ET3255 and is the answer not in the manual?
General| Diode Test | Yes |
|---|---|
| Continuity Test | Yes |
| Duty Cycle | 0.1% to 99.9% |
| Temperature Range | -40°C to 1000°C |
| Operating Temperature | 0°C to 40°C |
| Power Supply | 9V battery |
| Frequency Range | 10Hz to 10MHz |
| Storage Temperature | -10°C to 50°C |
Highlights of the multimeter's capabilities including display, measurement functions, and accuracy.
Step-by-step guide for performing DC voltage measurements, including wiring and range selection.
Step-by-step guide for performing AC voltage measurements, including wiring and range selection.
Instructions for DC current measurement, including terminal selection and range.
Steps for performing 2-wire resistance measurements, including wiring and range selection.
Steps for performing 4-wire resistance measurements, including wiring and range selection.
Steps for measuring signal period, including wiring and range selection.
Steps for continuity testing, including threshold setting and buzzer indication.
Steps for measuring duty cycle, including wiring and range selection.
Instructions for AC current measurement, including terminal selection and range.
Steps for measuring frequency, including wiring and range selection.
Steps for testing diodes, including voltage thresholds and wiring.
Steps for measuring capacitance, including wiring and range selection.
Provides methods and detailed steps for calibrating DC voltage ranges.
Explains entering DC current calibration and lists required calibration values.
To Next Page