East West Furniture BEDFORD BFS024 User Manual

BEDFORD SWIVEL BACKLESS BARSTOOL 24'' SEAT HEIGHT
ASSEMBLY INSTRUCTIONS
SKU: BFS024
De
scription : BEDFORD SWIVEL BACKLESS BARSTOOL 24'' SEAT HEIGHT
Product Dimension : 20”1/2x20”1/2x24”.H
C
ube Size : 33.8”x 21.4”x 5.7” NW: 16.5 LBS
GW: 19.8 LBS
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability.
Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with the part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please contact us.
IMPORTANT NOTE:
175 Southbelt Industrial Dr,
Houston, TX 77047
Email:sales@eastwestfurniture.net

East West Furniture BEDFORD BFS024 Specifications

General

Brand	East West Furniture
Model	BEDFORD BFS024
Category	Indoor Furnishing
Language	English

Summary

Product Information and Preparation

Before Assembly Guidelines

Read and follow instructions carefully. Check all packing material for small parts.

Part List Identification

Separate, identify, and count all parts. Compare with the part list to ensure completeness.

Hardware List Identification

Verify all hardware is present by comparing it with the hardware list before assembly.

Assembly Steps

Step 1: Assemble Base Structure

Attach legs and footrest using specified bolts and washers. Do not fully tighten.

Step 2: Attach Revolving Fitting to Legs

Secure the revolving fitting to the assembled legs using bolts and washers.

Step 3: Attach Revolving Fitting to Seat Frame

Connect the revolving fitting to the seat frame using bolts and washers.

Step 4: Final Tightening and Leveling

Place the chair on a flat surface, ensure it is level, and then tighten all bolts.