EastPoint Springfield - Parts Identifier

¢ Electric Screwdriver or Power Driver
Req uired CAUTION - DO NOT OVER TIGHTEN. Over Tightening
- 1-Phillips Head Screwdriver will result in irreparable damage to the product. If using,
(Standard Size) — Not Included please make sure that the tool is set to a very low torque
to prevent damage to the product.
« 1 - Flat Head Screwdriver
(Standard Size) — Not Included » Socket Wrench Set
e 1 -Wrench - Included ¢ Level
How to use the: Instructions Parts ID #
PARTS IDENTIFIER aor
cv
. Part Name | -Part Image
Before you begin assembly, please make sure that
you have all the parts listed and in the correct
quantities. This will ensure the quickest and most
organized assembly.
Part Quantity
Be sure to work on the assembly on a soft a
non-marring surface such as carpet or the inside of
the corrugate box top to prevent causing damage
to the table surface during assembly.
*s Step Used In
PARTS IDENTIFIER
Components
Leg Top Panel Leg Support Plastic Leg-A
COS
SZ
#32101-O1ES #32101-O2ES #32101-03ES ©
FOR USE WITHSTEP #2
Plastic Leg - B_ Plastic Leg -C Plastic Leg - D
# 32101-04ES. #32101-05ES # 32101-O6ES
FOR USE WITH STEP #2 FOR USE WITH STEP #2 FOR USE WITH STEP #2