BEFORE WE BEGIN
WHAT’S IN THE BOX
IMPORTANT SAFETY INSTRUCTION
EN - 1
ATTENTION
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
This compact disc player is classified as a CLASS 1 LASER PRODUCT.
The CLASS 1 LASER PRODUCT label is located inside the CD compartment.
CLASS 1
LASER PRODUCT
The CAUTION marking is located at the bottom of the unit.
Below markings are located inside CD compartment.
DANGEROUS VOLTAGE
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated dangerous voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
DANGER:
Invisible and hazardous laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
LASER SAFETY: This unit employs a laser.
Only qualified service personnel should
attempt to service this device due to possible
eye injury.
CAUTION: USE OF CONTROLS,
ADJUSTMENTS OR PERFORMANCE,
PROCEDURE HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
KARAOKE MACHINE
TABLET
CRADLE
PRE-RECORDED
KARAOKE CD+G DISC
AV CABLE
AC POWER
ADAPTOR
DYNAMIC MICROPHONE
INSTRUCTION
MANUAL
Thank you for purchasing the EKS780-BT Karaoke Machine. This is your assurance of quality,
performance and value. This product was manufactured using the highest quality components
and standards of workmanship. Our engineers have included many useful and convenient
features in this product. Please be sure to read this instruction manual completely to make sure
you are getting the maximum benefit from each feature.
• This unit is designed to operate on an AC 100-240V~50/60Hz supply only. Connecting it to other power sources
may damage it. Ensure that the supply corresponds to the information on the rating label on the bottom of the unit.
• Under the environment with electrostatic discharge the sample may malfunction and need user reset to recover
sometimes.
To Next Page
Loading...
