Product Information
Easy Parting Tool
THE EASY PARTING TOOL
The Easy Parting Tool is great for making that last part-off
cut on projects up to 4” diameter and establishing diameters
on your spindle turning projects. Also, use your imagination
to add tiny details, deep grooves to your project and many
other unique cuts that were not so easy with your old parting
tool.
This is the easiest and best performing parting tool ever!
And with perfect geometries built right into the replaceable
cutters, you never need to fuss with sharpening.
Customer Support 1-866-963-0294
customerservice@easywoodtools.com
• Read this product information and watch our online videos
carefully until you fully understand the concepts involved
• Read and understand your lathe’s owners manual
• Wear safe clothing and proper eye protection
• Secure your workpeice properly
• Use the right tool for the job
• Set the tool rest height to align the top of the cutter to
spindle center
• Always maintain your tool flat on the tool rest and level to
the floor
• Never use the tool with the handle below level
• Maintain a sharp cutter so that you get a clean cut without
forcing the tool into the wood
• Never cut deeper than the “Max Overhang” label on the
toolbar or else the tool may become unstable
FOR YOUR SAFETY
• Maintain the tool dead vertical on the tool rest for the
duration of the cut. If you tilt it any, the tool may bind in the
groove and cause tool damage or injury!
• Do not make cuts on the face of your project more than
1/8” deep without widening the groove with a separate
plunge cut
• Never cut side-to-side with this tool. You will damage the
cutter pocket
• Never wiggle the tool side to side to widen the cut
• Don’t force the tool into the cut but rather use slow, even
cutting pressure
• Never part your project completely in two when working
between centers. This would cause the two halves of the
wood to pinch and pull out the cutter. (Cut down to about
a 1/4” diameter and then handsaw the remainder)
TOOL TIPS
Easy Wood Tools products are legendary in their ability to withstand an incredible
amount of abuse in the hands of most any turner. The Easy Parting Tool underwent
countless hours of real world testing for strength and durability both in-house and
in the hands of pro turners all over the country. This does not mean the product is
indestructible, but if used within reason, it will last you a lifetime.
Failure to follow the product use guidelines set forth in this information sheet will void
your warranty. Easy Wood Tools will not issue a refund or replacement if you damage
your tool through improper use.
We want you to be happy with your investment in our products. If you have any issue
at all with any Easy Wood Tools product, we want to hear from you.
Thank you for purchasing this Easy Parting Tool!
WARRANTY INFO
Be sure to register your new tool to receive advance notice of:
- Product updates
- Demonstration events and classes
- New tool models and products
Register at
www.easywoodtools.com
And don’t forget to check us out on Facebook!
REGISTER YOUR TOOL
Proposition 65 is a California law that applies to any
product(s) sold in California.
Some products sold on this website contain chemicals
known to the state of California to cause cancer and
birth defects or other reproductive harm.
A Proposition 65 warning means one of two things:
(1) the business has evaluated the exposure and has
concluded that it exceeds the “no signifi cant risk level”;
or (2) the business has chosen to provide a warning
simply based on its knowledge about the presence of
a listed chemical without attempting to evaluate the
exposure.
Easy Wood Tools, LLC has chosen to provide a
warning based on its knowledge about the presence
of one or more listed chemicals without attempting to
evaluate the level of exposure. With products on Easy
Wood Tools website, the exposure may be below the
Proposition 65 level of concern, or could even be zero.
However, out of an abundance of caution, Easy Wood
Tools, LLC has elected to place the Proposition 65
warning notifi cation on all its products.
This product may contain chemicals known to the State
of California to cause cancer and birth defects
or other reproductive harm.
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm.
Some examples of these chemicals are:
- lead from lead-based paints,
-
crystalline silica from bricks and cement and other
masonry products,
- arsenic and chromium from chemically treated lumber.
Your risk from exposure to these chemicals varies,
depending on how often you do this type of work.
To reduce your exposure, work in a well-ventilated
area and with approved safety equipment, such as
dust masks that are specially designed to fi lter out
microscopic particles.
California Proposition 65 Warning
REGISTER
your tool purchase
Click here
Look for this button
The Easy Wood Tools Team
Product In
ormation
Eas
Parting Tool
Customer Support 1-866-963-029
customerservic
ea
woodtools.com
Pi1 - Genuine EWT Carbide Cutters
Blade is thinner than cutting edge
Chevron Thumb Grips
Cutter name engraved on the tool bar
“Pi1” stands for “Parting Insert #1”
Widebody Tool Bar
To Next Page
Need help?
General