EasyManua.ls Logo

EasyCare iDry - User Manual

EasyCare iDry
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
user guideuser guide
the total body drying systemthe total body drying system
IDRY1IDRY1
easy are
systems
Question and Answer IconNeed help?

Do you have a question about the EasyCare iDry and is the answer not in the manual?

Summary

iDry Body Dryer Introduction

Overview of Components

Product Specifications

Installation Guide

Mounting Bracket and Pod

Mount the bracket at 198cm height and hang the pod. Insert blinds into the pod.

Attaching Legs and Foot

Connect the leg units to the pod and attach the foot to the lower leg.

Professional Installation and Sealing

Use a certified electrician and apply silicone sealant for a secure installation.

Fixing and Adjustments

Use non-ferrous screws for fixing and adjust leg length up to 44cm.

Remote Installation and Maintenance

Fitting the Remote Control

Install the remote base unit on the wall and connect the PVC connector.

Maintenance and Cleaning

Wipe the dryer with warm soapy water or detergent for cleaning.

Recycling Old Electricals

Recycle electrical items at local centres or take-back schemes.

Operating the iDry Body Dryer

Safety and Guarantee Information

Contact Details and Guarantee Form

Overview

The iDry Body Dryer is a total body drying system designed for convenient and hygienic drying in wet rooms or shower cubicles. It is a British-made product, emphasizing quality and adherence to strict control procedures.

Function Description:

The iDry Body Dryer provides an alternative to towel drying by circulating warm air around the body. It features two speed settings: a moderate airflow for initial drying and an increased airflow for more thorough drying. The system re-circulates warm air, and the ambient temperature can be influenced by changes in the space, such as opening a shower door.

Important Technical Specifications:

  • Model: IDRY1
  • Operating Voltage: 220/240V
  • Amperage: 12.8 amps
  • Output Temperature: 38°C (dependent on room temperature; output temperature can be 3-4°C above ambient)
  • Unit Size: 205cm (height) x 27.5cm (width) x 26.5cm (depth)
  • Drying Time: 3 minutes
  • Speed Function: 2 settings
  • Approval: CE
  • EU Directives: 2006/95/EC Low Voltage Directive, 2004/108/EC EMC Directive
  • IP Rating: IPX4

Usage Features:

  • Convenient Installation: The iDry Body Dryer is designed to fit conveniently into the corner of a wet room or shower cubicle.
  • Remote Control: The device is operated via a remote control, which can be positioned at a desired location on the wall. The remote connects to the main unit via a PVC connector.
  • Speed Settings: Users can select between two airflow speeds. Pressing the remote once activates a moderate speed, recommended for use while showering. Pressing it again increases the airflow for faster drying after showering.
  • Adjustable Leg Length: The length of the dryer leg can be reduced by a maximum of 44cm to accommodate different installation situations. It is recommended not to cut across the tear-drop pores on the leg.
  • Safety Precautions:
    • Keep fingers and hands away from moving parts inside the pod.
    • Do not operate the dryer unless it is fully assembled.
    • Do not attempt to open the pod of the body dryer.
    • Only use the dryer after sufficient instruction, knowledge, and supervision.
  • Installation Requirements:
    • Installation must be carried out by a "part p" certified electrician to ensure compliance with building regulations.
    • Non-ferrous screws should always be used for fixing to prevent corrosion.
    • A thin bead of heat-resistant silicone should be applied around the collar before fixing the leg top to ensure a strong and airtight seal.
    • The bracket for the pod should be fixed to the wall 198cm from the base and 13.5cm from the corner.

Maintenance Features:

  • Cleaning: The dryer can be wiped down with warm soapy water or any good quality detergent.
  • Recycling: The iDry Body Dryer is marked with the crossed-out wheeled bin symbol, indicating that it should not be disposed of with general household waste. Users are encouraged to recycle their old electrical and electronic devices at local recycling centers or through participating body dryer resellers. This helps save natural resources and prevents hazardous substances from contaminating soil and water in landfills.

Warranty and Support:

The body dryer comes with a two-year guarantee covering breakdown repairs due to faulty materials, defective components, or manufacturing defects, including the cost of functional replacement parts and labor by an iDry approved repairer. The guarantee does not cover accidental damage, misuse, abuse, external or appearance parts (remote, PVC connector, foot, legs), or repairs resulting from unauthorized repair or inexpert installation. The dryer must be correctly installed, located, and operated according to the user manual for the guarantee to be valid. Extended warranty and service packages (3 or 5 years) are available. Customer support is accessible via email (hello@idry.me) or phone (0800 933 0020).

EasyCare iDry Specifications

General IconGeneral
BrandEasyCare
ModeliDry
CategoryKitchen & Bath Fixtures
LanguageEnglish