EasyPro PCT810 User Manual (English)

To Next Page

Assembly Instructions

Thank you for purchasing EasyPro’s Pond Tent. Simple assembly, strong construction and large

coverage areas make these Pond Tents the perfect protection device for ponds, gardens or

landscape areas from leaves or a variety of unwanted pests.

CONTENTS

Tent body

Two berglass, collapsible poles

12 plastic stake anchors

Component bag (not pictured)

ASSEMBLY

Before beginning assembly conrm that all components are accounted for and in good condi-

tion. It is recommended to have two adults be involved in set up.

1 In an open area spread tent out at with pole sleeve side up. Assemble berglass poles by

pulling out each section and placing ends into the metal connectors.

2 Slide the assembled poles through the sleeves. Keep the sleeves in line and push the poles

through the sleeves. Toward the end it may work best to bunch up the last section of the

sleeve and then push the pole the rest of the way through.

PCT810 • PCT1014 • PCT1317

Please read this manual completely before assembling tent and save for future reference.

Need help?

Do you have a question about the EasyPro PCT810 and is the answer not in the manual?

EasyPro PCT810 Specifications

General

Lists the components included with the pond tent, such as the tent body, poles, and anchors.

Provides a step-by-step guide for assembling the pond tent, including pole setup and sleeve insertion.