EasyWalker june - How to Assemble and Use the Easywalker June Carrycot; Using the Easywalker June Carrycot

LT
LT - 3
Be aware of environmental consideraons. When disposing of packaging, carefully
separate rubbish for recycling.
How to assemble and use the easywalker june carrycot
WARNING!: Do not li the carrycot by the sun canopy. Use the handles on the sides.
IMPORTANT!: Only use the easywalker june carrycot or accessories approved for use
by easywalker on the easywalker june.
IMPORTANT!: When assembling the easywalker carrycot there should not be a child in
the carrycot.
Assembling the easywalker june carrycot
Carrycot
Take the easywalker june carrycot out of the box, take the cover o the carrycot and
remove the accessories, the maress and the boom plate (image 6).
Pull the fastener nearest to the head-end in the direcon of the head-end unl it “clicks”
(image 7). Pull the fastener nearest to the foot-end in the direcon of the foot-end unl
it “clicks”.
Replace the boom plate and the maress in the carrycot.
Sun canopy
IMPORTANT!: A small child has a very sensive skin. Never leave your child unaended
in the sun.
IMPORTANT!: Always use the sun canopy.
The sun canopy is exchangeable between the easywalker june and the easywalker june
carrycot. In order to detach the sun canopy from the easywalker june unzip the hood
from the back (image 8).
Aach the sun canopy to the carrycot by placing the sun canopy hinges over the knobs
on the frame of the carrycot. Then use the zipper to fasten the hood (image 9).
With the extra extension (image 10), you can provide extra shade for your child.
Using the easywalker june carrycot
Aaching the easywalker june carrycot onto the frame
Engage the parking brake of the easywalker june (image 11). Remove the seang from
the frame (see the manual of easywalker june).