EasyWalker MINI - Easywalker MINI Stroller Carrycot

EN
EN - 9
The sun canopy is exchangeable between the easywalker MINI stroller
and the carrycot. In order to detach the sun canopy from the easywalker
MINI stroller unzip the hood (image 37).
Inlay
To aach the inlay to the easywalker MINI stroller, place the inlay in the
seang (image 54). Put the safety harness through the appropriate holes
in the inlay (image 55). The inlay is ready for use.
WARNING! Always use the restraint system.
Design covers
IMPORTANT: Make sure, before assembly, that the logo’s on the design
covers are not upside down.
To aach the design covers, place them on both sides of the easywalker
MINI stroller over the side handles (image 56). Make sure that the folding
buons can move freely (image 57).
Carrycot
Congratulaons on the purchase of your easywalker MINI stroller
carrycot. The easywalker MINI stroller carrycot has been carefully created
with comfort, safety, ease of use and design in mind. Assembly and use
of the easywalker MINI stroller carrycot are comprehensively explained
in the instrucons. To get the most out of your easywalker MINI stroller
carrycot please follow the instrucons provided.
The easywalker MINI stroller carrycot meets the standards:
• EN1888:2012
• EN1466:2007
IMPORTANT! KEEP MANUAL FOR FUTURE REFERENCE
IMPORTANT! Read the instrucons carefully before use and keep them
for future reference. Your child’s safety may be aected if you do not
follow these instrucons.
WARNING! This product is suitable for a child who cannot sit up
unaided, roll over and cannot push itself up on its hands and knees.