EasyWalker MINI - Attaching Carrycot to Frame

EN
EN - 11
on the sides.
IMPORTANT: Only use the easywalker MINI stroller carrycot or
accessories approved for use by easywalker.
IMPORTANT: When assembling the easywalker MINI stroller carrycot
there should not be a child in the carrycot.
Assembling the easywalker MINI stroller carrycot
Carrycot
Take the easywalker MINI stroller carrycot out of the box, take the cover
o the carrycot and remove the accessories, the maress and the boom
plate (image 40).
Pull the fastener nearest to the head-end in the direcon of the head-
end unl it “clicks” (image 41). Pull the fastener nearest to the foot-end
in the direcon of the foot-end unl it “clicks”.
Replace the boom plate and the maress in the carrycot.
Sun canopy
IMPORTANT: A small child has a very sensive skin. Never leave your
child unaended in the sun.
IMPORTANT: Always use the sun canopy.
The sun canopy is exchangeable between the easywalker MINI stroller
and the easywalker MINI stroller carrycot. In order to detach the sun
canopy from the easywalker MINI stroller unzip the hood from the back
(image 37).
Aach the sun canopy to the carrycot by placing the sun canopy hinges
over the knobs on the frame of the carrycot. Then use the zipper to
fasten the hood (image 42). With the extra extension (image 38), you
can provide extra shade for your child.
Using the easywalker MINI stroller carrycot
Aaching the easywalker MINI stroller carrycot onto the frame
Engage the parking brake of the easywalker MINI stroller (image 17).