EasyWalker MINI - Page 6

EN
EN - 4
already ed to the frame. Be aware of environmental consideraons.
When disposing of packaging, carefully separate rubbish for recycling.
How to assemble and use the easywalker MINI stroller
TIP: If the instrucons say le or right, this is always meant when
looking from behind the easywalker MINI stroller push-bar.
IMPORTANT: When assembling the easywalker MINI stroller there
should not be a child in the seat or carrycot.
IMPORTANT: Avoid dangerous situaons. Take your child out of the
easywalker MINI stroller if you go up or down stairs, escalators or
steep hills.
IMPORTANT: The easywalker MINI stroller should only be used with
the accompanying seat and accessories. Only use the parts and
accessories approved for use by easywalker.
IMPORTANT: Do not use the easywalker MINI stroller if any part
is broken, torn, incomplete or does not seem to be funconing
correctly.
IMPORTANT: The easywalker MINI stroller is not designed for use when
jogging or roller skang.
Assembling the Easywalker MINI stroller
Frame
Take the easywalker MINI stroller out of the box and place it on its carton,
on the ground, in front of you (image 10). Unfold the easywalker MINI
stroller. If you hear a “click” the easywalker MINI stroller has unfolded
correctly (image 11).
Wheels
Flip the parking brake upwards (image 12). Insert the rear wheel into the
frame (image 13). If you hear a clear “click” the wheel is locked (image
14). Repeat this process on the opposite side with the second rear wheel.
To remove the rear wheel, press the buon on the inside of the frame
while pulling the wheel out.
To aach the front wheel, insert the axle of the front fork in the appropriate