EasyWalker MINI - Using the Easywalker MINI Stroller; Using the Stroller Frame; Parking Brake Usage

EN
EN - 5
opening of the frame. If you hear a “click” the wheel is locked (image 15).
Repeat this process on the opposite side with the second front wheel. To
remove a front wheel, pull the locking device backwards and the wheel,
together with the fork, will come o easily (image 16).
IMPORTANT: The ideal maximum tyre pressure is 1,4 Bar.
Using the easywalker MINI stroller
Frame
When folding or unfolding the easywalker MINI stroller make sure the
parking brake is engaged (image 17).
To fold the frame of the easywalker MINI stroller, adjust the sun canopy
and the handle bar to the lowest posion (image 18+19). Then push the
safety-buons on the le and the right side (image 20). While pushing
the safety-buons, pull the knobs upwards. When lied, the easywalker
MINI stroller will fold (image 21).
Unfold the easywalker MINI stroller. If you hear a “click” the easywalker
MINI stroller has unfolded correctly (image 11).
Parking break
Always engage the parking brake (image 17) when the easywalker MINI
stroller is not in use. And also when you put your child in the stroller,
when you adjust or (un)fold the stroller and when it’s parked.
Push bar
To adjust the push bar in height, unlock the clips on both sides of the push
bar. Move the push bar to the desired height, hearing clicking sounds for
the dierent posions, and lock the clips (image 19). Protect the foam on
the push bar against fricon and sharp objects.
Wheels
To change the front wheels from swivelling to xed posion, place the
front wheel straight under the stroller and push down the locking device
(image 22). Repeat this process on the opposite side with the second
front wheel.