IOM 53 3/4-4 10/2013 REV B. Page 1 of 6
Eaton Hydraulics LLC, Filtration Division, 44 Apple Street, Tinton Falls, NJ 07724, www.filtration.eaton.com, Phone732-212-4700
Model 53BTX Duplex Strainer, Sizes ¾” – 4”
TABLE OF CONTENTS
Introduction ...................................................................... 1
Receiving, Handling, and Inspection ................................. 2
Installation ......................................................................... 2
Start Up ............................................................................. 3
Operation .......................................................................... 3
Switching Flow ................................................................... 3
Basket Removal and Cleaning ........................................... 4
Basket Replacement ......................................................... 4
Shut Down ........................................................................ 4
Recommended Spare Parts ............................................... 5
INTRODUCTION
The Eaton Model 53BTX duplex strainer easily installs in
pipelines to remove sediment and debris from fluids. Fluid
flows uninterrupted while the basket is removed for cleaning.
These strainers are designed for pressure or suction
applications.
Straining on the Model 53BTX is accomplished by directing the
fluid through sized openings in the basket. Once sediment and
debris is collected in the basket, the fluid flow is directed by
manually turning the handle over to the other basket for
continuous operation. At this time the debris filled basket can
be removed for cleaning.
For additional information regarding Model 53BTX Duplex
Strainers visit our website at www.eaton.com/filtration
Read all the following information and instructions prior to installing and operating the equipment.
Failure to comply with these instructions could result in bodily injury or property damage.
To Next Page
Need help?
General
