Need help?Do you have a question about the Eaton 5P 1500 RT and is the answer not in the manual?
General| Topology | Line-Interactive |
|---|---|
| Nominal Output Voltage | 230 V |
| Nominal Input Voltage | 230 V |
| Number of Outlets | 8 |
| Form Factor | Rack/Tower |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -15 to 45 °C |
| Humidity | 0-95% non-condensing |
| Warranty | 2 years |
| Capacity | 1500 VA |
| Output Power Capacity | 1100 Watts |
| Output Frequency | 50/60 Hz |
| Efficiency | Up to 98% |
| Communication Ports | USB, RS-232 |
| Battery Type | Sealed Lead Acid |
| Typical Backup Time at Full Load | 5 minutes |
| Typical Recharge Time | 3 hours |
Lists standards the UPS complies with for safety and performance.
Explains symbols used to alert users to important information and warnings.
Guidelines for safe installation and operation of the UPS system.
Important safety measures for handling and storing the UPS.
EATON's environmental policy, product substances, packing, and end-of-life disposal.
Details on tower and rack installation configurations for the UPS models.
Identification and description of ports and connectors on the rear of 5P UPS models.
Overview of the UPS graphical LCD, buttons, and indicator lights with their status descriptions.
Explanation of the UPS LCD screen saver, backlight dimming, and operation status information.
Navigation of the UPS menu structure using buttons to access settings and information.
Configuration options for language, LCD, audible alarm, output voltage, and sensitivity.
Steps for unpacking the UPS and verifying all included accessories and components.
Instructions for connecting the internal battery module to the UPS unit.
Guide for setting up the UPS in a vertical tower configuration.
Steps for mounting the UPS in a 19-inch rack using the provided rails.
Details on connecting RS232, USB, and optional communication cards for UPS management.
How to connect the UPS to a FlexPDU for power distribution to multiple devices.
Procedures for connecting the UPS to a HotSwap MBP module for serviceability.
Direct connection of loads to the UPS without using FlexPDU or HotSwap MBP modules.
Steps to power on the UPS and ensure it's operating correctly.
How to start the UPS using battery power when utility power is unavailable.
Procedure for safely powering down the UPS system.
How the UPS functions when running on internal battery power.
How the UPS behaves when AC power is restored after an outage.
Explanation of Remote Power Off (RPO) and Remote ON/OFF (ROO) features.
Common UPS issues, possible causes, and corrective actions for general and HotSwap MBP module troubleshooting.
Safety precautions and step-by-step guide for removing and replacing the UPS battery module.
Procedures for performing maintenance on a UPS using the HotSwap MBP module.
Detailed electrical, environmental, and performance specifications for the 5P UPS models.
Definitions of key terms and acronyms used throughout the UPS manual.
To Next Page
