Need help?Do you have a question about the Eaton 5P 850VA and is the answer not in the manual?
General| Capacity | 850 VA |
|---|---|
| Output Power | 600 W |
| Input Voltage | 230 V |
| Output Voltage | 230 V |
| Form Factor | Tower |
| Input Connection | IEC 320 C14 |
| Topology | Line-Interactive |
| Nominal Output Voltage | 230 V |
| Nominal Input Voltage | 230 V |
| Efficiency at Full Load | 98% |
| Typical Recharge Time | 3 hours |
| Communication Ports | USB, Serial |
| Audible Alarm | Yes |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Waveform Type | Sine Wave |
| Output Connections | IEC C13 |
| Battery Type | Sealed Lead Acid |
| Typical Backup Time | 10 minutes |
Step-by-step instructions for physically installing the UPS in a tower configuration.
Instructions for wall-mounting specific rack-mount UPS models.
Steps for rack mounting the 650i R model UPS.
Steps for rack mounting the 850i R, 1150i R, and 1550i R models.
Procedures for starting the UPS, verifying status, and ensuring normal operation.
Steps to safely shut down the UPS unit.
To Next Page
