To Next PageTo Next Page
Need help?Do you have a question about the Eaton AFDD+ and is the answer not in the manual?
Specifies the correct 90-degree mounting orientation for the AFDD+ device.
Details torque settings (2-2.4Nm) and compatible copper wire sizes (1-25mm²).
Illustrates the correct connection of Line (L), Neutral (N), and Line Prime (L') terminals.
Explains the meaning of green, black, and yellow/red indicator lights and associated fault icons.
Details detection thresholds for overcurrent (I > In), residual current (I > IΔn), overvoltage (U > 270V), and high temperature (Tj > 115°C).
Specifies the correct 90-degree mounting orientation for the AFDD+ device.
Details torque settings (2-2.4Nm) and compatible copper wire sizes (1-25mm²).
Illustrates the correct connection of Line (L), Neutral (N), and Line Prime (L') terminals.
Explains the meaning of green, black, and yellow/red indicator lights and associated fault icons.
Details detection thresholds for overcurrent (I > In), residual current (I > IΔn), overvoltage (U > 270V), and high temperature (Tj > 115°C).
General| Frequency | 50/60 Hz |
|---|---|
| Mounting | DIN rail |
| Storage Temperature | -40°C to +70°C |
| Type | Arc Fault Detection Device (AFDD+) |
| Tripping Characteristics | B, C |
| Number of Poles | 1P+N, 3P+N |
| Breaking Capacity | 6kA |
| Standards | IEC 62606, IEC 61009-1 |
| Humidity | 95% RH (non-condensing) |
| Rated Current | 16A, 20A, 25A, 32A, 40A |
| Protection Features | Arc Fault, Overcurrent, Short Circuit |
