Eaton FAO-16810S-EP3 - Page 26

Model 8-Bolt Gear
Info.
6-Bolt Gear Info. Thru-
Shaft
Int.
Spline
Info.
Ext. Aux.
Counter-
shaft PTO
Ext.
Spline
Info.
% of
Engine
Speed
Transmission
Torque Limit for
PTO use (lb-ft)
FAOM-14810S-EC3 Yes
47T 6.0P,
20DEG PA
Yes
4
45T 6.0P,
20DEG PA
Lower
Left
32T 0.5P,
30DEG PA
N/A N/A
79
500
6
FAOM-15810S-EC3 Yes
47T 6.0P,
20DEG PA
Yes
4
45T 6.0P,
20DEG PA
Lower
Left
32T 0.5P,
30DEG PA
N/A N/A
79
FAOM-15810S-EP3 Yes
47T 6.0P,
20DEG PA
Yes
4
45T 6.0P,
20DEG PA
Lower
Left
32T 0.5P,
30DEG PA
N/A N/A 79
FAO-16810S-EP3 Yes
47T 6.0P,
20DEG PA
Yes
4
45T 6.0P,
20DEG PA
Lower
Left
32T 0.5P,
30DEG PA
N/A N/A 79
FAOM-15810S-EN3 Yes
47T 6.0P,
20DEG PA
Yes
4
45T 6.0P,
20DEG PA
Lower
Left
32T 0.5P,
30DEG PA
N/A N/A 79
FAO-16810S-EN3 Yes
47T 6.0P,
20DEG PA
Yes
4
45T 6.0P,
20DEG PA
Lower
Left
32T 0.5P,
30DEG PA
N/A N/A 79
23
PTO Configurations
Note: (4) - 6-bolt PTO will interfere with front mount oil filter. Rear or remote mount oil filter must be utilized.
Note: (5) - Transmi
ssion may be ordered with heavy-duty input bearing (4301417) to allow a of combined PTO output of 500 lb-
ft (continuous) and 750 lb-ft (intermittent) torque.
Note: (6) - Intermittent torque
of up to 750 lb-ft at the countershaft is permitted for 5 minutes of each 15 minute PTO duty cycle.