Zero 88 FLX S Lighting Console – User Manual Page 23 of 47
Once the cue is outputting, make the changes required
(using the MFFs, encoder wheels or touchscreen). To
record the changes to the current cue, press Update and
then press the relevant GO/Play button for the cue you
wish to update (such as the Master Playback button).
The cue will inherit the new information and the update will
be complete.
When you press Update , fade times appear on the
encoders in the same way as when pressing Record ,
allowing you to make changes to the fade times during the
update process.
Copying Cues
To copy one cue to another cue, press the Ⓩ
key to open the “Z Window”. In here, press the Copy
button to open the Copy Window. Ensure Cue is selected
in the window (it will be by default) and then type the
number of the cue you wish to copy in the “from” field, and
the number of the cue you wish to copy it to in the “to” field.
To copy a cue to or from an alternative playback, press the
playback after typing the cue number. Doing this moves
onto the next field automatically. For example, to Copy
Cue 7 from Playback 15 to cue 25 in playback 18, type 7
in the “from” field followed by Playback button 15 , and
then type 25 in the “to” field, followed by Playback button
18 .
Deleting Cues
To delete a cue, press the Delete button, press Ⓩ , and
then type the cue number you wish to delete (for example
15 ), and then press the Playback button which contains
the cue you wish to delete (for example, the Master
Playback). To delete multiple cues, the “thru” button can be
used (for example 15 Thru 20 ).
To delete all cues within a playback, see “Deleting
playbacks” on page 16.
Deleting a cue cannot be undone.
To Next Page
Loading...
