2022.10.7
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
19
TRSM0940 Auxiliary Section Service Procedures | LAS/VAS Auxiliary Section Removal and Disassembly
2. Install Auxiliary Counter Shaft Support Straps using
bolts 3 out of the 4 bolts for the Auxiliary Counter Shaft
Bearing Covers. Use the longer bolts to secure the cen-
ter of each strap as this will ensure the Auxiliary
Counter Shafts will remain in time.
3. Remove the 19 bolts that fasten the Auxiliary Section
to the Transmission Main Case.
Note: Remove the Range Cylinder Assembly, if needed,
in order to remove all Auxiliary Case bolts.
To Next Page
Loading...