224
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
2022.10.7
Main Case Main Shaft with Low Force Gearing Disassembly | Disassembly and Assembly TRSM0940
Main Case Main Shaft Disassembly with Low
Force Gearing
1. Remove the front (4th and 5th Gear) Sliding Clutch
from the Main Shaft
2. From the rear of the Main Shaft, remove the Reverse
Gear.
3. Remove the 1st and Reverse Sliding Clutch and hub
4. Remove Snap Ring that retains the key.
To Next Page
Loading...