72
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
2022.10.7
MHP/MXP/VHP/VXP Auxiliary Section Removal and Disassembly | Auxiliary Section Service Procedures TRSM0940
5. Remove the Range Cylinder assembly.
6. Remove the 3/4” Lock Nut on the Splitter Yoke Bar.
7. Remove the Splitter Sliding Clutch and Splitter Yoke
bar and fork.
8. Remove the Splitter Cylinder Assembly
9. Prepare the Auxiliary Section to remove the Auxiliary
Counter Shafts. For ease of disassembly, mount the
Auxiliary Section upright in a vise.
Caution: As the counter shaft straps are remove, the
Counter Shaft can fall.
!
To Next Page
Loading...